• Call TODAY for an estimate on your project!

Exposed Fastener Panels

Exposed Fastener Metal Roof & Wall Panels,
Roll Formed Up to 50’ Length

Royal Span X Panel
Royal Rib X Panel
Tex Rib Panel


Panel Coatings

Acrylic Galvalume or Painted

SPECIFICATION SHEETS

Royal Span X Metal Panel

  1. NAME:
    Royal Span X Panel
  2. PRODUCT DESCRIPTION:
    Metal Panel used in roof & wall systems. Panels are attached to support structures with exposed fasteners. The
    panel profile consists of 1-1/4” high ribs spaced 12” on center with panel coverage of 36”. Two minor ribs are
    spaced between the major ribs.
  3. STANDARD PANEL MATERIAL:
    26 Gauge steel coated both sides with a layer of (Galvalume) aluminum-zinc alloy applied by the continuous hot dip method. Colored panels are coated with Akzo Nobel Ceram-A-Star 1050 or Cool Color Coating. The coating is a high performance silicone polyester paint system which is applied over a primed surface. The panels are also available in other special order paint systems as well.
  4. TRIM/FLASHING MATERIAL:
    The same gauge, color, and finish is used for all trim material.
  5. PANEL SEALANT TAPE:
    Panel lap conditions are sealed using a butyl-based tape mastic that is non-staining, non-corrosive, non-volatile and non-toxic.
  6. FASTENERS:
    Fasteners for panel connection to steel substructure are #12 X 1” or #12 X 1-1/4” self-drilling screws with uni-seal washers. Panel installation to wood substructure would use #10 X 1” or #10 X 1-1/2” Woodbinder screws. Lap Screws, #14 X 7/8”, are also necessary for proper panel installations.
  7. INSTALLATION:
    Roof Slope to be a minimum ½:12. Endlaps must be a minimum of 4”. All roof panel laps should utilize butyl tape to provide weather-tightness. Wall panel applications are also possible with the panel.
  8. WARRANTY:
    40yr Limited Color Panel Warranty and 25yr Limited Bare Panel Warranty
  9. MAINTENANCE:
    Yearly roof inspections and gutter cleaning as needed.
  10. QUOTING AND AVAILABILITY:
    Call any Royal Metal Building Components Office.

Royal Rib X Metal Panel

  1. NAME:
    Royal Rib Panel
  2. PRODUCT DESCRIPTION:
    Metal Panel used in roof & wall systems. Panels are attached to support structures with exposed fasteners. The
    panel profile consists of 3/4” high ribs spaced 6” on center with panel coverage of 36”.
  3. STANDARD PANEL MATERIAL:
    26 Gauge steel coated both sides with a layer of (Galvalume) aluminum-zinc alloy applied by the continuous hot dip method. Colored panels are coated with Akzo Nobel Ceram-A-Star 1050 or Cool Color Coating. The coating is a high performance silicone polyester paint system which is applied over a primed surface. The panels are also available in other special order paint systems as well.
  4. TRIM/FLASHING MATERIAL:
    The same gauge, color, and finish is used for all trim material.
  5. PANEL SEALANT TAPE:
    Panel lap conditions are sealed using a butyl-based tape mastic that is non-staining, non-corrosive, non-volatile and non-toxic.
  6. FASTENERS:
    Fasteners for panel connection to steel substructure are #12 X 1” or #12 X 1-1/4” self-drilling screws with uni-seal washers. Panel installation to wood substructure would use #10 X 1” or #10 X 1-1/2” Woodbinder screws. Lap Screws, #14 X 7/8”, are also necessary for proper panel installations.
  7. INSTALLATION:
    Roof Slope to be a minimum ½:12. Endlaps must be a minimum of 4”. All roof panel laps should utilize butyl tape to provide weather-tightness. Wall panel applications are also possible with the panel.
  8. WARRANTY:
    40yr Limited Color Panel Warranty and 25yr Limited Bare Panel Warranty
  9. MAINTENANCE:
    Yearly roof inspections and gutter cleaning as needed.
  10. QUOTING AND AVAILABILITY:
    Call any Royal Metal Building Components Office.

Tex Rib Metal Panel

  1. NAME:
    Tex Rib Panel
  2. PRODUCT DESCRIPTION:
    Metal Panel used in roof & wall systems. Panels are attached to support structures with exposed fasteners. The panel profile consists of 3/4” high ribs spaced 9” on center with panel coverage of 36”. Two minor ribs are spaced between the major ribs.
  3. STANDARD PANEL MATERIAL:
    26 Gauge steel coated both sides with a layer of (Galvalume) aluminum-zinc alloy applied by the continuous hot dip method. Colored panels are coated with Akzo Nobel Ceram-A-Star 1050 or Cool Color Coating. The coating is a high performance silicone polyester paint system which is applied over a primed surface. The panels are also available in other special order paint systems as well.
  4. TRIM/FLASHING MATERIAL:
    The same gauge, color, and finish is used for all trim material.
  5. PANEL SEALANT TAPE:
    Panel lap conditions are sealed using a butyl-based tape mastic that is non-staining, non-corrosive, non-volatile and non-toxic.
  6. FASTENERS:
    Fasteners for panel connection to steel substructure are #12 X 1” or #12 X 1-1/4” self-drilling screws with uni-seal washers. Panel installation to wood substructure would use #10 X 1” or #10 X 1-1/2” Woodbinder screws. Lap Screws, #14 X 7/8”, are also necessary for proper panel installations.
  7. INSTALLATION:
    Roof Slope to be a minimum ½:12. Endlaps must be a minimum of 4”. All roof panel laps should utilize butyl tape to provide weather-tightness.
  8. WARRANTY:
    40yr Limited Color Panel Warranty and 25yr Limited Bare Panel Warranty
  9. MAINTENANCE:
    Yearly roof inspections and gutter cleaning as needed.
  10. QUOTING AND AVAILABILITY:
    Call any Royal Metal Building Components Office.

Call TODAY
for an estimate on your project