Logo - RMBC

Call Royal Today!

San Benito: 956-399-2271 | Boerne: 830-249-3331
  Edinburg: 956-603-2046 | Del Rio: 830-774-1290
Exposed Fastener Panels Collage

Exposed Fastener Panels

Exposed Fastener Metal Roof Panels, Roll formed up to 50' length

Royal Span X Panel

Tex Rib Panel

Royal Rib X Panel

Metal Wall Panels, Roll formed up to 50' length

Royal Span X Panel

Tex Rib Panel

Royal Rib X Panel

Panel Coatings

Acrylic Galvalume, Bare or Painted

 

Galvalume Spec Sheet

Sample Warranty

Color Chart

Akzo Nobel Cool Chemistry Color Video

Akzo Nobel Cool Chemistry Brochure

Royal Span - Royal Span X

Specification Sheet for Royal Span X Metal Panel
  1. NAME: Royal Span X Panel
  2. PRODUCT DESCRIPTION: Metal Panel used in roof & wall systems. Panels are attached to support structures with exposed fasteners. The panel profile consists of 1-1/4" high ribs spaced 12" on center with panel coverage of 36". Two minor ribs are spaced between the major ribs.
  3. Standard Panel Material: 26 Gauge steel coated both sides with a layer of (Galvalume) aluminum-zinc alloy applied by the continuous hot dip method. Colored panels are coated with Akzo Nobel Ceram-A-Star 1050 or Cool Color Coating. The coating is a high performance silicone polyester paint system which is applied over a primed surface. The panels are also available in other special order paint systems as well.
  4. Trim/Flashing Material: The same gauge, color, and finish is used for all trim material.
  5. Panel Sealant Tape: Panel lap conditions are sealed using a butyl-based tape mastic that is non-staining, non-corrosive, non-volatile and
    non-toxic.
  6. Fasteners: Fasteners for panel connection to steel substructure are #12 X 1" or #12 X 1-1/4" self-drilling screws with uni-seal washers. Panel installation to wood substructure would use #10 X 1" or #10 X 1-1/2" Woodbinder screws. Lap Screws, #14 X 7/8", are also necessary for proper panel installations.
  7. Installation: Roof Slope to be a minimum ½:12. Endlaps must be a minimum of 4". All roof panel laps should utilize butyl tape to provide weather-tightness. Wall panel applications are also possible with the panel.
  8. Warranty: 40yr Limited Color Panel Warranty and 25yr Limited Bare Panel Warranty
  9. Maintenance: Yearly roof inspections and gutter cleaning as needed.
  10. Quoting and Availability: Call any Royal Metal Building Components Office.

 

Royal Rib - Royal Rib X

Specification Sheet for Royal Rib X Metal Panel
  1. NAME: Royal Rib Panel
  2. PRODUCT DESCRIPTION: Metal Panel used in roof & wall systems. Panels are attached to support structures with exposed fasteners. The panel profile consists of 3/4" high ribs spaced 6" on center with panel coverage of 36".
  3. Standard Panel Material: 26 Gauge steel coated both sides with a layer of (Galvalume) aluminum-zinc alloy applied by the continuous hot dip method. Colored panels are coated with Akzo Nobel Ceram-A-Star 1050 or Cool Color Coating. The coating is a high performance silicone polyester paint system which is applied over a primed surface. The panels are also available in other special order paint systems as well.
  4. Trim/Flashing Material: The same gauge, color, and finish is used for all trim material.
  5. Panel Sealant Tape: Panel lap conditions are sealed using a butyl-based tape mastic that is non-staining, non-corrosive, non-volatile and non-toxic.
  6. Fasteners: Fasteners for panel connection to steel substructure are #12 X 1" or #12 X 1-1/4" self-drilling screws with uni-seal washers. Panel installation to wood substructure would use #10 X 1" or #10 X 1-1/2" Woodbinder screws. Lap Screws, #14 X 7/8", are also necessary for proper panel installations.
  7. Installation: Roof Slope to be a minimum ½:12. Endlaps must be a minimum of 4". All roof panel laps should utilize butyl tape to provide weather-tightness. Wall panel applications are also possible with the panel.
  8. Warranty: 40yr Limited Color Panel Warranty and 25yr Limited Bare Panel Warranty
  9. Maintenance: Yearly roof inspections and gutter cleaning as needed.
  10. Quoting and Availability: Call any Royal Metal Building Components Office.

 

Tex Rib

Specification Sheet for Tex Rib Metal Panel
  1. NAME: Tex Rib Panel
  2. PRODUCT DESCRIPTION: Metal Panel used in roof & wall systems. Panels are attached to support structures with exposed fasteners. The panel profile consists of 3/4" high ribs spaced 9" on center with panel coverage of 36". Two minor ribs are spaced between the major ribs.
  3. Standard Panel Material: 26 Gauge steel coated both sides with a layer of (Galvalume) aluminum-zinc alloy applied by the continuous hot dip method. Colored panels are coated with Akzo Nobel Ceram-A-Star 1050 or Cool Color Coating. The coating is a high performance silicone polyester paint system which is applied over a primed surface. The panels are also available in other special order paint systems as well.
  4. Trim/Flashing Material: The same gauge, color, and finish is used for all trim material.
  5. Panel Sealant Tape: Panel lap conditions are sealed using a butyl-based tape mastic that is non-staining, non-corrosive, non-volatile and non-toxic.
  6. Fasteners: Fasteners for panel connection to steel substructure are #12 X 1" or #12 X 1-1/4" self-drilling screws with uni-seal washers. Panel installation to wood substructure would use #10 X 1" or #10 X 1-1/2" Woodbinder screws. Lap Screws, #14 X 7/8", are also necessary for proper panel installations.
  7. Installation: Roof Slope to be a minimum ½:12. Endlaps must be a minimum of 4". All roof panel laps should utilize butyl tape to provide weather-tightness.
  8. Warranty: 40yr Limited Color Panel Warranty and 25yr Limited Bare Panel Warranty
  9. Maintenance: Yearly roof inspections and gutter cleaning as needed.
  10. Quoting and Availability: Call any Royal Metal Building Components Office.
Home  |  About RMBC  |  Steel Buildings  |  Components  |  FAQ  |  Contact Us  |  Copyright © 2016 Royal Metal Buildings, Roofing, and Components  |  All Rights Reserved